EPJ Appl. Metamat.
Volume 6, 2019
Metamaterials Research and Development in Japan
|Number of page(s)||6|
|Published online||11 November 2019|
Enhancement of inductance along metallic mesh wires in three-dimensional quasi-isotropic metamaterials using high-ε dielectric particles for impedance-matching with free space
Electrical Engineering and Electronics, Kyoto Institute of Technology, Matsugasaki, Sakyo-ku, Kyoto 606-8585, Japan
2 Electrical Engineering Department, University of California, Los Angeles, 405 Hilgard Ave., Los Angeles, CA 90095-1594, USA
* e-mail: email@example.com
Accepted: 11 October 2019
Published online: 11 November 2019
In this paper, we consider cube-shaped unit cells including high-ε dielectric cubes under magnetic dipole-like resonance placed at the center and metallic mesh wires for negative permittivity to construct three-dimensional quasi-isotropic metamaterials in the microwave region. Basically, such structures suffer from their low wave impedance due to inclusion of high-ε materials. To reduce effective permittivity of the composite structures, we propose to insert additional inductance into the metallic mesh. For the insertion of lumped inductors along the wires, dispersion diagram and the Bloch-impedance are numerically estimated, and converted to effective permittivity and permeability. The numerical simulation results clearly show almost 3-D isotropic propagation characteristics in a specific frequency region and enhancement of the Bloch-impedance close to free space in the left-handed region. The lumped inductors are replaced by meander-line strip patterns for practical configurations. The metallic patterned structures also achieve the enhanced Bloch impedance that is well-matched to free space.
Key words: Metamaterials / negative-refractive-index / dielectric cubes / impedance matching
© T. Yamaguchi et al., published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.