Open Access
Issue
EPJ Appl. Metamat.
Volume 12, 2025
Article Number 5
Number of page(s) 15
DOI https://doi.org/10.1051/epjam/2025005
Published online 17 December 2025
  1. X. Feng, L. Yan, W. Chun, Review on vibration isolation technology, J. Phys: Conf. Ser. 1820, 5–10 (2021) https://doi.org/10.1088/1742-6596/1820/1/012009 [Google Scholar]
  2. S. Kaul, Vibration isolation— background, in: Modeling and Analysis of Passive Vibration Isolation Systems (Elsevier, 2021), pp. 1–26 https://doi.org/10.1016/B978-0-12-819420-1.00007-8 [Google Scholar]
  3. Y. Zhao, J. Cui, X. Bian, L. Zou, S. Liang, L. Wang, Study on performance of an air spring isolator for large-scale precision optical micro-vibration isolation, ACM Int. Conf. Proc. Ser. Part F16898, 173–178 (2020) https://doi.org/10.1145/3452940.3452974 [Google Scholar]
  4. D.O. Lee, G. Park, J.H. Han, Experimental study on on-orbit and launch environment vibration isolation performance of a vibration isolator using bellows and viscous fluid, Aerosp. Sci. Technol. 45, 1–9 (2015) https://doi.org/10.1016/j.ast.2015.04.012 [Google Scholar]
  5. G. Xu, Z. Gou, B. Zhang, Study of flexible spacecraft pointing control based on integrated vibration isolation and pointing stewart platform, in: Signal and Information Processing, Networking and Computers. Lecture Notes in Electrical Engineering (Springer, 2020), Vol. 628. https://doi.org/10.1007/978-981-15-4163-6_54 [Google Scholar]
  6. C. Deng, D. Mu, X. Jia, Z. Li, Effects of rubber shock absorber on the flywheel micro vibration in the satellite imaging system, Photonic Sens. 6, 372–384 (2016) https://doi.org/10.1007/s13320-016-0349-1 [Google Scholar]
  7. M. Safarabadi, H. Izi, J. Haghshenas, H.K. Kelardeh, Design of micro-vibration isolation system for a remote-sensing satellite payload using viscoelastic materials, Eng. Solid Mech. 8, 69–76 (2020) https://doi.org/10.5267/j.esm.2019.8.003 [Google Scholar]
  8. Q. Wang et al., A metamaterial isolator with tunable low frequency stop-band based on magnetorheological elastomer and magnet spring, Mech. Syst. Signal Process. 208, 111029 (2024) https://doi.org/10.1016/j.ymssp.2023.111029 [Google Scholar]
  9. M. Wang et al., Modeling and analysis of a four-parameter vibration isolator with frequency-dependent damping and its implementation based on GERF, Smart Mater. Struct. 32, 075023 (2023) https://doi.org/10.1088/1361-665X/acde24 [Google Scholar]
  10. J. Tang, Y. Yang, Y. Li, D. Cao, A 6-DOF micro-vibration isolation platform based on the quasi-zero-stiffness isolator, Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. 235, 6019–6035 (2021) https://doi.org/10.1177/09544062211010831 [Google Scholar]
  11. G. Yan, S. Wang, H.X. Zou, L.C. Zhao, Q.H. Gao, W.M. Zhang, Bio-inspired polygonal skeleton structure for vibration isolation: Design, modelling, and experiment, Sci. China Technol. Sci. 63, 2617–2630 (2020) https://doi.org/10.1007/s11431-020-1568-8 [Google Scholar]
  12. X. Zhou, X. Sun, D. Zhao, X. Yang, K. Tang, The design and analysis of a novel passive quasi-zero stiffness vibration isolator, J. Vib. Eng. Technol. 9, 225–245 (2021) https://doi.org/10.1007/s42417-020-00221-6 [Google Scholar]
  13. A. Zolfagharian, M. Bodaghi, R. Hamzehei, L. Parr, M. Fard, B.F. Rolfe, 3D-printed programmable mechanical metamaterials for vibration isolation and buckling control, Sustainability 14, 6831 (2022). https://doi.org/10.3390/su14116831 [Google Scholar]
  14. Q. Zhang, D. Guo, G. Hu, Tailored mechanical metamaterials with programmable quasi-zerostiffness features for full-band vibration isolation, Adv. Funct. Mater. 31, 2101428 (2021). https://doi.org/10.1002/adfm.202101428 [Google Scholar]
  15. M. Al Rifaie, H. Abdulhadi, A. Mian, Advances in mechanical metamaterials for vibration isolation: a review, Adv. Mech. Eng. 14, 1–20 (2022) https://doi.org/10.1177/16878132221082872 [Google Scholar]
  16. J.C. Ji, Q. Luo, K. Ye, Vibration control based metamaterials and origami structures: a state-of-the-art review, Mech. Syst. Signal Process. 161, 107945 (2021) https://doi.org/10.1016/j.ymssp.2021.107945 [Google Scholar]
  17. W. Elmadih, D. Chronopoulos, W.P. Syam, I. Maskery, H. Meng, R.K. Leach, Three-dimensional resonating metamaterials for low-frequency vibration attenuation, Sci. Rep. 9, 11503 (2019) https://doi.org/10.1038/s41598-019-47644-0 [Google Scholar]
  18. H.T. Shi, M. Abubakar, X.T. Bai, Z. Luo, Vibration isolation methods in spacecraft: a review of current techniques, Adv. Sp. Res. 73, 3993–4023 (2024) https://doi.org/10.1016/j.asr.2024.01.020 [Google Scholar]
  19. H. Meng, et al. 3D rainbow phononic crystals for extended vibration attenuation bands, Sci. Rep. 10, 18989 (2020) https://doi.org/10.1038/s41598-020-75977-8 [Google Scholar]
  20. A.O. Krushynska et al., Accordion-like metamaterials with tunable ultra- wide low-frequency band gaps Accordion-like metamaterials with tunable ultra-wide low-frequency band gaps, New J. Phys. 20, 073051 (2018). https://doi.org/10.1088/1367-2630/aad354 [Google Scholar]
  21. X.K. Han, Z. Zhang, Bandgap design of three-phase phononic crystal by topological optimization, Wave Motion 93, 102496 (2020) https://doi.org/10.1016/j.wavemoti.2019.102496 [Google Scholar]
  22. Z. Jia, Y. Chen, H. Yang, L. Wang, Designing phononic crystals with wide and robust band gaps, Phys. Rev. Appl. 9, 44021 (2018) https://doi.org/10.1103/PhysRevApplied.9. 044021 [Google Scholar]
  23. X. An, C. Lai, W. He, H. Fan, Three-dimensional meta-truss lattice composite structures with vibration isolation performance, Extrem. Mech. Lett. 33, 100577 (2019) https://doi.org/10.1016/j.eml.2019.100577 [Google Scholar]
  24. H. Meng, D. Chronopoulos, A.T. Fabro, W. Elmadih, I. Maskery, Rainbow metamaterials for broadband multi-frequency vibration attenuation: numerical analysis and experimental validation, J. Sound Vib. 465, 115005 (2020)https://doi.org/10.1016/j.jsv.2019.115005 [Google Scholar]
  25. O.R. Bilal, D. Ballagi, C. Daraio, Architected lattices for simultaneous broadband attenuation of airborne sound and mechanical vibrations in all directions, Phys. Rev. Appl. 10, 054060 (2018) https://doi.org/10.1103/PhysRevApplied.10. 054060 [Google Scholar]
  26. Z. Tian, L. Yu, Rainbow trapping of ultrasonic guided waves in chirped phononic crystal plates, Sci. Rep. 7, 40004 (2017) https://doi.org/10.1038/srep40004 [Google Scholar]
  27. W. Jiang, G. Yin, L. Xie, M. Yin, Multifunctional 3D lattice metamaterials for vibration mitigation and energy absorption, Int. J. Mech. Sci. 233, 107678 (2022) https://doi.org/10.1016/j.ijmecsci.2022.107678 [CrossRef] [Google Scholar]
  28. H. Sheng, M. He, J. Zhao, C. Ting, Q. Ding, P. Lee, The ABH-based lattice structure for load bearing and vibration suppression, Int. J. Mech. Sci. 252, 108378 (2023) https://doi.org/10.1016/j.ijmecsci.2023.108378 [Google Scholar]
  29. K.K. Saxena, R. Das, E.P. Calius, Three decades of auxetics research – materials with negative poisson’s ratio: a review, Adv. Eng. Mater. 18, 1847–1870 (2016) https://doi.org/10.1002/adem.201600053 [CrossRef] [Google Scholar]
  30. F. Wang, Systematic design of 3D auxetic lattice materials with programmable Poisson’s ratio for finite strains, J. Mech. Phys. Solids 114, 303–318 (2018) https://doi.org/10.1016/j.jmps.2018.01.013 [Google Scholar]
  31. L. Yang, O. Harrysson, H. West, D. Cormier, Mechanical properties of 3D re-entrant honeycomb auxetic structures realized via additive manufacturing, Int. J. Solids Struct. 69, 475–490 (2015) https://doi.org/10.1016/j.ijsolstr.2015.05.005 [Google Scholar]
  32. Y. Zhang, L. Sun, X. Ren, X.Y. Zhang, Z. Tao, Y. Min Xie, Design and analysis of an auxetic metamaterial with tuneable stiffness, Compos. Struct. 281, 114997 (2022) https://doi.org/10.1016/j.compstruct.2021.114997 [Google Scholar]
  33. L. D’Alessandro, V. Zega, R. Ardito, A. Corigliano, 3D auxetic single material periodic structure with ultra-wide tunable bandgap, Sci. Rep. 8, 2262 (2018) https://doi.org/10.1038/s41598-018-19963-1 [Google Scholar]
  34. A. Seharing, A.H. Azman, S. Abdullah, A review on integration of lightweight gradient lattice structures in additive manufacturing parts, Adv. Mech. Eng. 12, 1–21 (2020) https://doi.org/10.1177/1687814020916951 [Google Scholar]
  35. X.Y. Zhang, X. Ren, Y. Zhang, Y.M. Xie, A novel auxetic metamaterial with enhanced mechanical properties and tunable auxeticity, Thin-Walled Struct. 174, 109162 (2022) https://doi.org/10.1016/j.tws.2022.109162 [Google Scholar]
  36. Y. Chen, T. Li, F. Scarpa, L. Wang, Lattice metamaterials with mechanically tunable Poisson’s ratio for vibration control, Phys. Rev. Appl. 7, 024012 (2017) https://doi.org/10.1103/PhysRevApplied.7.024012 [Google Scholar]
  37. Z. Tao et al., A novel auxetic acoustic metamaterial plate with tunable bandgap, Int. J. Mech. Sci. 226, 107414 (2022) https://doi.org/10.1016/j.ijmecsci.2022.107414 [Google Scholar]
  38. X. Fei, L. Jin, X. Zhang, X. Li, M. Lu, Three-dimensional anti-chiral auxetic metamaterial with tunable phononic bandgap, Appl. Phys. Lett. 116, 2 (2020) https://doi.org/10.1063/1.5132589 [Google Scholar]
  39. Y. Wei, Q. Yang, R. Tao, SMP-based chiral auxetic mechanical metamaterial with tunable bandgap function, Int. J. Mech. Sci. 195, 106267 (2021) https://doi.org/10.1016/j.ijmecsci.2021.106267 [Google Scholar]
  40. M. Kheybari, C. Daraio, O.R. Bilal, Tunable auxetic metamaterials for simultaneous attenuation of airborne sound and elastic vibrations in all directions, Appl. Phys. Lett. 121, 081702 (2022) https://doi.org/10.1063/5.0104266 [Google Scholar]
  41. D. Qi, H. Yu, W. Hu, C. He, W. Wu, Y. Ma, Bandgap and wave attenuation mechanisms of innovative reentrant and anti-chiral hybrid auxetic metastructure, Extrem. Mech. Lett. 28, 58–68 (2019) https://doi.org/10.1016/j.eml.2019. 02.005 [Google Scholar]
  42. N.H. Vo, T.M. Pham, H. Hao, K. Bi, W. Chen, A reinvestigation of the spring-mass model for metamaterial bandgap prediction, Int. J. Mech. Sci. 221, 107219 (2022) https://doi.org/10.1016/j.ijmecsci.2022.107219 [Google Scholar]
  43. D. DePauw, H. Al Ba’ba’a, M. Nouh, Metadamping and energy dissipation enhancement via hybrid phononic resonators, Extrem. Mech. Lett. 18, 36–44 (2018) https://doi.org/10.1016/j.eml.2017.11.002 [Google Scholar]
  44. Y. Huang, J. Li, W. Chen, R. Bao, Tunable bandgaps in soft phononic plates with spring-mass-like resonators, Int. J. Mech. Sci. 151, 300–313 (2019) https://doi.org/10.1016/j.ijmecsci.2018.11.029 [Google Scholar]
  45. J. Zhao, G. Zhou, D. Zhang, I. Kovacic, R. Zhu, H. Hu, Integrated design of a lightweight metastructure for broadband vibration isolation, Int. J. Mech. Sci. 244, 108069 (2023) https://doi.org/10.1016/j.ijmecsci.2022.108069 [Google Scholar]
  46. W. Elmadih, D. Chronopoulos, J. Zhu, Metamaterials for simultaneous acoustic and elastic bandgaps, Sci. Rep. 11, 14635 (2021) https://doi.org/10.1038/s41598-021-94053-3 [Google Scholar]
  47. L. D’Alessandro, R. Ardito, F. Braghin, A. Corigliano, Low frequency 3D ultra-wide vibration attenuation via elastic metamaterial, Sci. Rep. 9, 8039 (2019) https://doi.org/10.1038/s41598-019-44507-6 [Google Scholar]
  48. M.I. Hussein, R. Khajehtourian, Nonlinear Bloch waves and balance between hardening and softening dispersion, Proc. R. Soc. A Math. Phys. Eng. Sci. 474, 20180173 (2018) https://doi.org/10.1098/rspa.2018.0173 [Google Scholar]
  49. J. Meaud, K. Che, Tuning elastic wave propagation in multistable architected materials, Int. J. Solids Struct. 122, 69–80 (2017) https://doi.org/10.1016/j.ijsolstr.2017.05.042 [Google Scholar]
  50. A.T. Fabro, H. Meng, D. Chronopoulos, Uncertainties in the attenuation performance of a multifrequency metastructure from additive manufacturing, Mech. Syst. Signal Process. 138, 106557 (2020) https://doi.org/10.1016/j.ymssp.2019.106557 [Google Scholar]
  51. M. Brun, F. Cortés, J. García-Barruetabeña, I. Sarría, M.J. Elejabarrieta, A robust technique for polymer damping identification using experimental transmissibility data, Polymers (Basel). 14, 2535 (2022) https://doi.org/10.3390/polym14132535 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.