EPJ Appl. Metamat.
Volume 7, 2020
Metamaterial Research Updates from China
|Number of page(s)||7|
|Published online||08 September 2020|
Dual-polarized antenna design integrated with metasurface and partially reflective surface for 5G communication
Key Laboratory of High Speed Circuit Design and EMC of Ministry of Education, School of Electronic Engineering, Xidian University, Xi'an 710071, PR China
* e-mail: email@example.com
Accepted: 5 August 2020
Published online: 8 September 2020
A design of electrical down-tilt dual-polarized base station antenna array (BSAA) for 5G communication applications is presented in this paper, which is realized by integrating with reconfigurable reflective metasurface and partially reflective surface (PRS). By controlling the varactor diodes which are inserted into the reflective elements, we can adjust the mainlobe direction of BSAA. Moreover, the PRS over the array is utilized to construct Fabry-Perot (FP) cavity with reflective metasurface and ground plane. Based on this design approach, a 1 × 6 dual-polarized BSAA operating from 3.4 GHz to 3.6 GHz is designed and fabricated. Simulated and measured results show that the gain is enhanced about 2.56 dB by PRS while side lobe level (SLL) is less than −20 dB. The mainlobe of the antenna array can be adjusted accurately within ±5° for beam down-tilt. The cross polarization discrimination (XPD) is less than −40 dB.
Key words: Metasurface / partially reflective surface / electrical down-tilt / base station antenna / Fabry-Perot cavity
© Z. Li et al., published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.