EPJ Appl. Metamat.
Volume 7, 2020
Frontiers in microwave, photonic, and mechanical metamaterials
|Number of page(s)||8|
|Published online||19 January 2021|
Double-scale homogenized impedance models for periodically modulated metasurfaces
Department of Information Engineering and Mathematics, University of Siena, Siena, Italy
2 Wave Up Srl, Siena, Italy
* e-mail: firstname.lastname@example.org
Accepted: 11 December 2020
Published online: 19 January 2021
This paper investigates the accuracy of homogenized impedance models for the description of periodically modulated metasurfaces (MTSs) realized by printing subwavelength patches on a grounded dielectric slab. The problem is relevant to surface-wave based MTS antennas. The homogenized models are based on the local impedance synthesis of the subwavelength patch elements on the basis of a micro-periodicity assumption (that is, with a subwavelength period); the homogenized impedance is successively used in a macro-periodically modulated problem; that is, a periodic homogenized problem with a period which includes several micro-periods. Two different homogenized impedance models are compared. A first model is based on an anisotropic “impenetrable” impedance, defined by boundary conditions (BCs) at the MTS-air interface, while the second one uses a “penetrable” impedance sheet describing the homogenized BCs imposed by the metallic cladding on the grounded metallic slab. Although the presence of the grounded slab is considered in both models, they provide different results when the homogenized impedance is used to describe the macro-modulation. It is shown, through comparison with a full-wave analysis, that both the homogenized models can provide consistent results, but the penetrable impedance model is more accurate in the prediction of both the complex propagation constant and the current distribution. This is due to its capability to correctly account for the spatial dispersivity of the MTS.
Key words: Metasurface / equivalent impedance model / leaky wave antennas / periodic structures
© E. Martini et al., published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.