Issue |
EPJ Appl. Metamat.
Volume 5, 2018
|
|
---|---|---|
Article Number | 1 | |
Number of page(s) | 13 | |
DOI | https://doi.org/10.1051/epjam/2017014 | |
Published online | 23 February 2018 |
https://doi.org/10.1051/epjam/2017014
Research Article
Effect of small anisotropy and absorption on metamaterial applications: “non-ideal” features of propagation and tunneling of electromagnetic waves
Gomel State Technical University, October ave. 48,
Gomel
246746, Belarus
* e-mail: starodub@tut.by
Received:
13
June
2017
Accepted:
4
December
2017
Published online: 23 February 2018
For cases of isotropic, uniaxial, and biaxial electromagnetic metamaterials (MM), a comparative analysis of the effect of small deviations of local material parameters from “ideal” values on the realization of MM applications (“zero” media, the Veselago-Pendry superlens) has been carried out. On the basis of the detailed investigation of the solutions of dispersion equations, it is established that even a very small dielectric and (or) magnetic anisotropy of a general form is the universal “non-ideal” factor determining (to a much greater extent than small losses) the operability of those MM applications where the wave misphasing in the effective medium is undesirable. The characteristics of wave attenuation in the absorbing isotropic and weakly anisotropic MM are mainly comparable for the applications. Limitations of the traditional approaches using the second-order curves (or surfaces) for analytic modeling of the absorbing MM dispersion equations are shown.
© E. Starodubtsev, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.